Control Panel; Setting The Language - Piazzetta P963 THERMO Instructions For Installation, Use And Maintenance Manual

6.6 CONTROL PANEL

The stove is fitted with a digital control panel to operate stove functions
when the LCD remote control is unavailable.
The various functions of the control panel are listed below.
NUMBER KEY / DISPLAY
1
Key ON/OFF
2 ON/OFF Led
3 Key INCREASE POWER
4 INCREASE POWER Led
5
Key DECREASE POWER
6 DECREASE POWER Led
7 SAFETY DEVICE Led
8 RADIO SIGNAL EMISSION Led

6.7 SETTING ThE LANGUAGE

This function allows one of the languages available to be set on the display according to the country where the product is installed.
Function
Selecting the Press the MENU button, use the MENU SELECTION button to select the
language menu LANGUAGE SELECTION menu and the SET button to confirm.
Selecting the Scroll with the MENU SELECTION button to find the required language (e.g.
language
ENGLISH LANGUAGE) and confirm with the SET button.
After confirmation the readout ENABLED FUNCTION appears on the
display, which then automatically returns to the initial readout.
32
Allows you to start up or shut down the product manually.
If the LED lights up, it indicates that the stove is lit.
Allows you to increase the power setting. You can choose between the two available settings, P1-P3. If the led
is blinking, it indicates that the stove is in cooling phase.
The LED lights up when the power-increase key is pressed and indicates that the power has been increased.
Allows you to decrease the power setting. You can choose between the two available settings, P1-P3.
The LED lights up when the power-decrease key is pressed and indicates that the power has been decreased.
If the LED lights up, it indicates that a safety device has activated. After approx. 60 seconds the alarm signal will
sound (if activated). In the event of activation proceed as follows:
- turn off the stove by pressing the ON/OFF key for several seconds;
- the alarm signal will stop;
- wait until you are sure that combustion of any pellets left in the grate has ceased;
- wait for the stove to cool, then check for and remove whatever has activated the safety device. Finally, after
having cleaned the grate, restart the stove by pressing the ON/OFF key.
The led lights up when the stove receives data from the remote control.
HOW TO SET THE LANGUAGE
Action
H07027850 / DT2000931 – 01
2
3
8
7
4
2
6
1
DESCRIPTION
S E L E C T
S E L E C T
S E L E C T
L A N G U A G E
L A N G U A G E
L A N G U A G E
1
1 1
L A N G U A G E
L A N G U A G E
L A N G U A G E
E N G L I S H
E N G L I S H
E N G L I S H
1
1
1
F U N C T I O N
F U N C T I O N F U N C T I O N
E N A B L E D E N A B L E D
E N A B L E D
1
1 1
DT2010222-07
1
3
5
DT2030332-00
DT2010469-04
Display