Remote Control - Piazzetta P963 Instructions For Installation, Use And Maintenance Manual

6.2 REMOTE CONTROL

• The pellet stove comes equipped with an LCD-display remote control
and radio transmitter which allow you to operate its various functions.
a
The remote's range can be affected by other devices which
operate on a continuous radio frequency of 433.92 MHz, for
example radio headphones, toys, computers etc.
The remote has a range of around seven metres in conditions
where there is no interference from other sources.
• When pressing the keys to select the various functions wait for
a signal from the stove that the selection has registered before
selecting further functions. Or if you are in an adjoining room wait
for confirmation on the remote's display. If the stove is not receiving
signals from the remote try bringing the remote closer to the stove.
Below are listed the various functions of the remote control's keys.
NUMBER KEY / DISPLAY
1 Key ON/OFF
2 Key CHILD-LOCK
3 Key POWER
4 Key FAN SPEED
5 Key SELECT
6
Key TEMPERATURE
7 Key TIMER
8 Key MENU
9
Key SET
10 Key MENU SELECTION
11 Key ESC
12 Key OPT
13
Display
14 Display POWER
15
Display MULTIFUOCO
16
Display DAYS OF THE WEEK
17
Display RADIO SIGNAL EMISSION
18 Display TIMER
19 Display SAFETY
20
Display FLAT BATTERY
Fig. 59
Allows you to start up or shut down the stove.
Pressing the child-lock key and holding it down (for around 5 seconds) until KEYBOARD BLOCKED
appears on the display will disable the keyboard. To re-enable the keyboard press the child-lock
key and hold it down (for around 8 seconds) until KEYBOARD UNBLOCKED appears on the display.
Allows you to select the power setting. With the SELECT key you can choose between the five
available settings, P1-P2-P3-P4-P5.
Allows you to choose the speed setting on the Multifuoco fan. With the SELECT key you can choose
between the four available settings, 01-02-03-04.
Allows you to choose: • power level - having previously pressed the POWER key
• fan speed - having previously pressed the FAN SPEED key
• temperature - having previously selected the TEMPERATURE key
Allows you to set the room temperature. The SELECT key will allow to choose the desired
temperature between 44°F and 86°F / (7°C and 30°C).
Displays the current date and time.
Allows: • access to the programming menu
• return to the initial display
Confirm MENU selected
Scrolls through the programming MENU
Returns to previous menu
Displays the MULTICOMFORT temperatures. The dash before the temperature shows which sensor
is giving the temperature reading.
Shows on three lines the function settings, the current time and the temperature.
Shows the power setting selected, P1-P2-P3-P4-P5.
Shows the Multifuoco setting selected, 01-02-03-04. The two lines of squares to the left and to the
right show respectively the left or right fan.
Shows the day of the week, 1 Monday, 2 Tuesday, 3 Wednesday, 4 Thursday, 5 Friday, 6 Saturday,
7 Sunday.
Active if the remote is receiving data from the stove
Shows that the timer is engaged
Symbol appears when the safety system is activated
Shows that the battery is flat or running down
H07032120 / DT2002308 – 00
15
19
18
16
!
2
1 2 3 4 5 6 7
4
3
GRUPPO PIAZZETTA
5
8
9
MENU ESC
SET OPT
10
DESCRIPTION
DT2010220-07
17
20
13
14
1
6
7
11
12
DT2030325-00
29