Camera Setup; General; Figure 22: Camera - General Setup Screen - Eneo TVR-2008AM4.0 User Manual

Camera Setup

General

You can turn the camera number On or Off, and you can change the Title of each camera using the virtual keyboard.
You can also determine which cameras will display on the monitors by selecting Normal, Covert 1 or Covert 2 from
a drop-down list in the Use column.
NOTE: When selecting the Covert 1, the DVR displays the camera title and status icons on the covert video.
When selecting the Covert 2, the DVR displays only camera title on the covert video.
A user who does not have Covert Camera View authority cannot view video from cameras set to Covert 1
or Covert 2 in both the live monitoring and playback modes.
You can select the width resolution supported by the camera between 720, 960 and HD by highlighting the box under
the Mode heading and pressing the
pressing the button allows the DVR to automatically detect the width resolution supported by the camera.
NOTE: The system restarts automatically after changing the resolution settings.
If the camera's width resolution is 960 and Automatic Detection is selected, the mode will be set to 720.
Figure 22: Camera – General setup screen.
button. Highlighting the box under the Automatic Detection heading and
Digital Video Recorder
37