Eneo TVR-2008AM4.0 User Manual page 52

Highlight Use UPnP and press the
NAT (Network Address Translation) device to the DVR will be enabled automatically via UPnP (Universal Plug and
Play) service. This function will be especially useful when accessing a port on a private IP address.
NOTE: For the UPnP service to work, the NAT device should support the UPnP Port Forwarding function and
the function should be set to enabled.
You cannot change the port settings when Use UPnP is On.
Highlight the Status box and press the
service.
Highlight the Test box and press the
Selecting DHCP from the Type and highlighting Save button reads the current IP address of the DVR configured by
DHCP (Dynamic Host Configuration Protocol) network.
Highlight Auto (Default) and press the
the IP address of the DNS server automatically.
NOTE: Selecting Auto will only be enabled when the DVR is configured for DHCP network.
NOTE: If the DVR is configured for DHCP network, the IP address of the DVR might change whenever the unit is
turned on.
button to toggle between On and Off. When it is On, port forwarding from the
button to display the port numbers forwarded from the NAT device via UPnP
button to test the current LAN settings you made.
button to toggle between On and Off. When it is On, the DVR will obtain
Digital Video Recorder
43