Eneo TVR-2008AM4.0 User Manual page 59

Hybrid video recorder
Table of Contents

Advertisement

User's Manual
The DVR can be set up to send an email when an event occurs. The Mail Group and Recipient can be turned On or Off
by highlighting the boxes beside the individual mail group and recipient accounts and pressing the
the box beside "Group & Recipient" and pressing the
and Off.
The +/– column is used to collapse and expand recipient groups. If there is a + or – in this column, it indicates the item
is a Group Name. If there is a – in front of the Group Name, it indicates that the group has been "expanded" and all
of the Recipient Names within that group are displayed below the Group Name. If there is a + in front of the Group
Name, it indicates that the group has been "collapsed" and all of the Recipient Names within that group are hidden.
To collapse or expand a group, highlight the +/– column in front of the desired group and press the
The
column can be used to delete a Recipient Name or an entire Group. If the
cannot be deleted. Highlight the
Recipient or Group.
Highlight the + Group and press the
an email.
Highlight the + Mail and press the
Highlight the box under the Attach Type heading and press the
an email.
NOTE: Attaching a image file to an email will not be available for the Text-In event.
Highlight SMTP Setup... and press the
Highlight the box beside Port and press the
obtained from your system administrator. The default port number is 25.
Highlight Use SSL/TLS and press the
email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.
50
button will toggle between all mail accounts being turned On
and press the
button. You will be asked to confirm that you want to delete the
button to add a recipient Group and select the image file format attached to
Highlight the box beside Group and press the
keyboard appears allowing you to enter the Group name.
Highlight the box beside Attach Type and press the
can select between CBF and JPG. When selecting CBF, the DVR
will attach an event detected video clip to an email. When selecting
JPG, the DVR will attach the event detected image file (JPEG format)
to an email.
button to add a mail Recipient.
button. The SMTP Setup screen appears.
Highlight the box beside SMTP Server and press the
A virtual keyboard appears that you can use to enter the IP address
or domain name of the SMTP server. Highlighting
you to select your SMTP server from a list of registered SMTP
servers.
NOTE: You will need to get the IP Address or domain name
of the SMTP Server from your network administrator.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting up the LAN.
button. Use the arrow buttons to enter the SMTP Server port number
button to toggle between On and Off. When it is On, the DVR can send an
is grayed out, that Group or Recipient
Highlight Use and press the
between On and Off. Assign the Recipient to a
Group and enter the Recipient's Display Name.
Highlight the box beside Address and enter the
recipient's e-mail address and mail server provider.
Highlighting
allows you to select the mail server
provider from a list of registered SMTP mail server
providers.
button to change the image file format attached to
button. Highlighting
button.
button. A virtual
button. You
button to toggle
button.
allows

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tvr-2016am4.0

Table of Contents