Chapter 2 — Installation
Package Contents
The package contains the following:
Digital Video Recorder
Power Cord
Quick User Guide
Software CD (User's Manual included)
Rack-mount Kit
Assembly Screws for Adding Hard Disk Drives
SATA Cables
Infrared Remote Control
Required Installation Tools
No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up part
of your system.
Video Input
eSATA Port
Audio In/Out
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Figure 2: DVR rear panel.
Alarm Input/Output
Factory Reset Switch
Connect the coaxial cables from the video sources to the BNC Video In
connectors.
RS485 Port
RS232 Port
Video Out
Network Port
Power Cord Connector
Digital Video Recorder
3