Eneo TVR-2008AM4.0 User Manual page 77

User's Manual
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting
It is the same as pressing the
Camera Menu
(Camera Menu) → Zoom and choosing the camera number zooms the current playback image
 Zoom: Selecting
of the selected camera on the screen. It is the same as pressing the
Zoom mode.
(Camera Menu) → Audio toggles audio playback On and Off. Recorded audio will be played
 Audio: Selecting
when the DVR displays a camera with recorded audio in full screen mode.
 Show/Hide Text-In: Selecting
data on the screen if the video was recorded with text-in data.
 Edit Group: Selecting
pressing and holding the
Cameo Mode section for details.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
Export
 A–B Clip-Copy: Selecting
icon displays at the bottom-left corner of the screen. Selecting A–B Clip-Copy again will set the ending
and the
point of the video to be clip copied and displays the Clip-Copy screen. See the following Clip Copy section for details.
 Clip-Copy: Select
the following Clip Copy section for details.
(Export) → Print allows you to print a selected image. See the following Print section for details.
 Print: Selecting
Status
Selecting (Status) in the Search menu allows you to check the status of the DVR's system, inputs and storage. Refer
to the previous Live Monitoring – Status Monitoring section for details.
NOTE: Selecting Status will only be enabled for a user who has System Check authority.
Data Source
(Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
Selecting
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.
68
button.
PANIC
(Camera Menu) → Show Text-In or Hide Text-In shows or hides the text-in
(Camera Menu) → Edit Group enters to the Active Cameo mode. It is the same as
button in any multiview formats. Refer to the previous Live Monitoring – Active
(Export) → A–B Clip-Copy will set the starting point of the video to be clip copied,
(Export) → Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup. See
again stops panic recording.
button. Selecting Zoom again exits the
ZOOM