Table of Contents
Advertisement
User's Manual
Live Monitoring Menu
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
screen asking you to confirm whether or not you want to log out the current user.
Monitor
(Monitor) in the Live Monitoring menu will allow you to select the monitor from Main and Spot. It is
Selecting
the same as pressing the
MONITOR
monitor.
Display
Full Screen: Selecting
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
Clicking the left mouse button on the screen again returns to the previous display mode.
PIP, 2x2, 1+5, 1+7, 3x3, 4x4: Selecting
or 4x4) displays the cameras in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7, 3x3 or 4x4). Selecting
each display mode is the same as pressing the
one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
NOTE: In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the right mouse button to display the Camera Menu.
Selecting Go To Main swaps the selected channel with the main channel. This function is supported only in
the 1+5 and 1+7 display modes and can be activated from any of channel screens except the main channel
screen.
Camera OSD, Status OSD: Selecting
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or
(Previous Group or Next Group) in the Live Monitoring menu moves to the previous or next page.
It is the same as pressing the
Freeze
Selecting
(Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select
It is the same as pressing the
while in the Freeze mode can also exit the Freeze mode. While in the Freeze mode, the icon
corner if Freeze is selected in the Display setup screen (OSD tab).
Alarm
Selecting
(Alarm) in the Live Monitoring menu resets the DVR's outputs including the internal buzzer during an alarm.
Panic
Selecting
(Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
panic recording. It is the same as pressing the
58
button. You can select the screen format and sequence monitoring of the selected
(Display) →
(Full Screen) and choosing the camera number button displays the
(Display) →
DISPLAY
(Display) → Camera OSD or Status OSD toggles Camera OSD
button.
GROUP
(Play/Pause) button. Pressing any button except for the
PANIC
button.
(Logout) in the Live Monitoring menu displays the Logout
,
,
,
,
or
button or scrolling the mouse wheel up and down when in
(PIP, 2x2, 1+5, 1+7, 3x3
again.
and
buttons
MENU
PANIC
displays in bottom-left
again stops
Advertisement
Table of Contents
