Table of Contents
Advertisement
User's Manual
Spot Monitor
Highlight Spot Monitor and press the
Highlight the box in the Channels column and press the
Pressing the
SEQUENCE
the DVR to sequence cameras.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel.
Monitoring and playing back video from network devices is not supported on the SPOT monitor.
56
button, and the Spot Monitor setup screen appears.
Figure 38 : Display – Spot Monitor setup screen.
button on the remote control or selecting
button.
You can define which cameras display sequentially
on the Spot Monitor when in the single-screen display
format. Highlighting the box under the Camera and
pressing the
button toggles between On and Off.
You can adjust the display dwell time by highlighting
the box under the Dwell and pressing the
(Sequence) in the Live Monitoring menu causes
button.
Advertisement
Table of Contents
