Table of Contents
Advertisement
User's Manual
Clip-Copy
Video clips can be copied on an external USB hard disk or flash drive. The copied video clips can be viewed on
computers running Microsoft Windows 2000, XP, Vista or 7. Refer to the Appendix – USB Hard Disk Drive Preparation
for information on preparing the external drive for clip copy.
Selecting A–B Clip-Copy in the Search – Export menu or pressing the
button on the remote control during
BACK UP
playback will set the starting point of the video to be clip copied, and the
icon displays at the bottom-left corner of
the screen. Selecting A–B Clip-Copy in the Search – Export menu or pressing the
button again will set the
BACK UP
ending point of the video to be clip copied by displaying the Clip-Copy screen.
Pressing and holding the
button on the remote control for more than three seconds while in the Search mode
BACK UP
or Live Monitoring mode initiates the One-Touch Clip Copy function. The last recorded image will be the ending
point of video to be clip copied, and the system will automatically begin to calculate the possible video data size that
the selected storage media can handle.
Select Clip-Copy in the Search – Export menu or press the
BACK UP
button on the remote control while in the Live
Monitoring mode, and the Clip-Copy screen appears to allow clip copy setup.
Figure 53: Clip-Copy screen.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside From and press the
(Play/Pause) button to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting
and pressing the
button the bookmark list displays and the bookmark point you selected will be the starting date
and time.
Highlight the box beside To and press the
button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting
and
pressing the
button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside Channels and press the
button. You can select the cameras that you would like to include
in your video clip .
Highlight the box beside Password and press the
button. A virtual keyboard appears allowing you to enter the
password for reviewing the video clips.
Highlight the box beside Dest. and press the
button. You can select the storage device or a NetFS site on which
you would like to record the video clip. If you enabled the NetFS function (Network menu > NetFS tab) and set the
Use setting to ALL or Clip-Copy, you can copy video clips to the NetFS site. If you select NetFS, select a NetFS
site from the registered NetFS site list.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
76
Advertisement
Table of Contents
