Table of Contents
Advertisement
For the Memory Stick Duo (Pro), you need an
adapter (generally included with the memory
card).
Instruction on the Use of Memory Cards
¿
Never use force to insert the memory card into the
slot, note the correct insertion direction (see also
the information printed on the machine near the slot).
¿
Do not use more than one storage medium at a
time!
¿
If your multifunction machine cannot read the in-
serted memory card, check whether you have used
a compatible memory card and whether you have in-
serted the memory card correctly.
¿
Only pull out the inserted memory card once the
multifunction machine has executed the print job.
¿
The name of the file folder on your memory card
should not contain any periods.
²
With function 84, you can load the memory
contents of the inserted memory card. Press
MENU/OK and 84.
Directly Connecting a
Digital Camera
Your multifunction machine is compatible with digital
cameras of the mass storage class and imaging class and
supports the PictBridge standard.
Æ
Read the user manual for your digital camera
carefully to ensure proper use and to learn
about the capabilities and requirements.
The power load on all USB ports may not exceed
0.7 amperes to ensure USB functionality. Do
not connect more than one high-power
device to your multifunction machine at
a time.
Connect the digital camera with a USB cable to the
front USB port of your multifunction machine.
²
Connect your digital camera to your
multifunction machine only once all pend-
ing print orders are completed and the machine
is in the starting mode.
5. Photo Printer
With function 85, you can load the memory
contents of your connected digital camera (mass
storage class). Press MENU/OK and 85.
Transmitting Image Files
via Infrared
You can send files to your multifunction machine for
printing from all devices (e.g. camera phones, handhelds)
with an infrared interface (OBEX-protocol).
1
Position your infrared-capable device such that
both infrared ports face each other.
Æ
Ensure that the distance does not exceed
20 cm and that the angle of your device to the
multifunction machine is no greater than about
15 °.
Never use more than one storage medium at a
time!
2
On the mobile device, select the image files you
would like to send. Please consult the user manual
of your mobile device for precise instructions.
3
Confirm with OK to access the photo menu of
your multifunction machine (see Printing Image
Files from the Photo Menu).
²
The infrared function is activated at the fac-
tory. You can deactivate the infrared function
by pressing MENU/OK and 941 on your
multifunction machine. Use / to select OFF
and confirm with OK.
Reading Image Files
After you have established the data transmission in
one of the ways described above, a message appears on
the display indicating the number of image files your
multifunction machine has detected (up to 999). Your
multifunction machine automatically detects existing
DPOF files and PictBridge signals. You can also print
out your photos from the photo menu.
²
For large amounts of data, reading of the
photos may take a few moments.
23
Advertisement
Table of Contents
