Table of Contents
Advertisement
1.
1.
Installation
Package Contents
The following parts are included in the package:
²
If a part is missing that is not one of the coun-
try-specific items or if parts are damaged, please
contact your retailer or our customer service.
1. Installation
Multifunction
machine
Printout tray
Two ink cartridges
(black and colour)
User manual
Installation guide
Installation-CD
Power cord with
plug
Telephone cord
with plug
USB cable
Setting Up the
Multifunction Machine
1
Remove the transport protection (e.g. tape). Any
sticker can be pulled off without leaving any resi-
due.
Æ
Set up your machine so that the socket is
easily accessible because your multifunction
machine does not have an on/off button. (To
disconnect your machine from the power supply,
pull the power plug out of the socket—see the
chapter Safety Instructions.)
2
Insert the printout tray into the slot provided in
the paper output until reaching the stop.
3
Pull the printout tray as far out as possible and fold
the paper stopper up to prevent a paper jam.
Loading Printing
Media
Load paper into the paper tray before plugging in the
machine. Your multifunction machine supports nu-
merous paper formats and types. You can use both pre-
printed material and refill paper of the supported paper
types (see chapter Appendix / Technical Data).
Loading Paper
Use only undamaged paper that is suitable for use with
inkjet printers.
²
Do not use any paper lighter than 75 g/m
ensure good printing quality.
1
Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack lightly
against a flat surface. This will prevent several sheets
of paper from being drawn in all at once.
2
to
11
Advertisement
Table of Contents
