Inserting Cartridges - BELGACOM Belgafax 710 User Manual

1 Enter the date and time with the number keypad
and confirm the entry with OK (e.g. press 08
08 05 14 00 for August 8, 2005,
2:00 pm).
2 If you have entered an incorrect number, you can
correct the entry with / and C.
3 Confirm with OK.
²
If the power supply is interrupted (e.g. after
a power failure), you must enter the date and
time again.

Inserting Cartridges

Ink cartridges must be installed in your multifunction
machine for scanning, copying and printing. Two ink
cartridges (black and colour) have been included with
your machine to allow you to use these functions right
away. The ink level memory for the cartridges is preset
at the factory. You do not need a Plug'n'Print card to
update the cartridges. For instructions on changing car-
tridges or inserting a photo cartridge, please consult the
chapter Troubleshooting.
Æ
When first setting up your machine, only use
the ink cartridges included in the package!
1 Fold the colour display back to the original posi-
tion.
Open the machine by taking hold of the moulded
grip under the machine cover ...
... and lifting the housing upward.
1. Installation
2 Press on the spring catch of the cartridge holder to
open it.
3 Take the ink cartridges out of the packaging, re-
move the packaging material and carefully pull off
the protective strip.
Æ
Please make certain that the protective strip
has been completely removed. Be careful not
to touch the nozzles or contacts.
4 Insert the cartridges with the "nose" pointing down
and tilted back at an angle; the black cartridge
on the left, the colour cartridge on the right.
5 Close the holder. You will hear a click when the
cover of the holder snaps into place.
15