Table of Contents
Advertisement
7 SMS
SMS Requirements
CLIP for SMS
Your device is preset for using the SMS (Short Messaging
Service) services. Caller identification (CLIP) must be ac-
tivated for the SMS to work. It is possible that you will not
be able to send and receive SMS messages from a private
branch exchange. Please contact Belgacom for information
about this service.
Sending SMS
1 Press _.
2 Using [ select SEND SMS .
3 Confirm with OK.
You can also call the function by pressing OK,
31 and OK.
4 Enter the text using the keys (A—Z). You can enter
160 characters.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters. Press COPY to print
the message before sending it.
5 Press _.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Confirm with OK.
8 With a sub-address, you send an SMS message to a cer-
tain fax machine that is connected to a telephone line
along with several other devices. If the recipient has a
sub-address, enter it here.
9 Press _. The message is sent.
Sending to Multiple Recipients (= Broad-
casting)
1 Press _.
2 Using [ select SEND SMS .
3 Confirm with OK.
You can also call the function by pressing OK,
31 and OK.
4 Enter the text as described under Sending SMS.
5 Press _.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Press À.
8 Enter the next telephone numbers. Between the indi-
vidual recipients, press À. You can enter up to 10 re-
cipients.
9 Press _. The message is sent.
SMS
Receiving SMS Messages
Receiving SMS Messages
When you have received an SMS, the green light â/_
will shine on your device, and the _ symbol will appear
on the display. Received SMS messages are printed out au-
tomatically. If you have turned the automatic printing
function off, the SMS messages will be stored. Your device
can store up to 30 SMS messages.
If you use an additional device with SMS function on
the same line, the handset number (sub-address)
might be different.
Reading SMS Messages
1 Press _.
2 Using [ select READ SMS .
3 Confirm with OK.
You can also call the function by pressing OK,
32 and OK.
4 Using [ select the SMS that you would like to read.
Unread SMS messages are marked with a star *.
5 Confirm with OK.
Printing SMS Messages
1 Press _.
2 Using [ select PRINT SMS .
3 Confirm with OK.
You can also call the function by pressing OK,
34 and OK.
4 Using [ select the SMS that you would like to print.
SELECTED —Using [ select the message that you
would like to print.
NEW —Prints all unread SMS messages
ALL —Prints all received SMS messages
5 Confirm with OK.
Deleting SMS Messages
SMS Deletion Introduction
Your device can store up to 30 SMS messages. If the mes-
sage memory is full, the device cannot receive any more
messages. Delete SMS messages to free up memory.
1 Press OK, 33 and OK.
2 Using [ to select the SMS message you would like to
delete.
SELECTED —Using [ select the SMS that you would
like to delete.
ALREADY READ —Deletes all read SMS messages
ALL —All SMS messages will be deleted.
3 Confirm with OK.
EN
17
Advertisement
Table of Contents
