Aligning Cartridges; Connecting Additional Devices - BELGACOM Belgafax 710 User Manual

6 Close the machine
Æ
If the error message CHANGE CARTRIDGE
POSITIONS appears on the display, you
have inserted the cartridges incorrectly. Open
the machine and insert the cartridges correctly
(see steps 1 to 6).

Aligning Cartridges

Press OK. After the ink cartridges are inserted, your
multifunction machine prints out a test page and auto-
matically configures the correct parameters for the best
possible printing result; this process can take some time.
Remove the test page. This completes the installation
process.
Connecting Additional
Devices
You can operate other devices on a telephone line in
addition to your multifunction machine, for instance
cordless telephones, answering machines, charge
counters or modems.
If you would like to use special peripheral equipment
with your multifunction machine, you should contact
a specialised dealer.
Connection to the
Multifunction Machine
You can connect additional devices directly to your
multifunction machine. Insert the telephone cord of
the additional device into the EXT. socket on the back
side of your multifunction machine.
16
²
We recommend connecting additional de-
vices directly to the multifunction machine
because its built-in active fax switch will then
function optimally and is capable of controlling
the additional devices (see chapter Fax Switch /
Setting the Fax Reception Mode).
Connection to the
Telephone Line
If you connect additional telecommunications de-
vices to the same telephone wall socket, make sure the
multifunction machine is the first device connected to
the line.
Variant 1
Variant 2
ADSL Connection
In the event that you use a ADSL modem: Connect
the multifunction machine after the modem! For ad-
ditional information, please consult the user manual of
your ADSL system.
ISDN Connection
Details for ISDN connections can be found in the in-
structions provided with the terminal adapter or the
dial-up router.
1. Installation