Table of Contents
Advertisement
Copier K
4. 4.
With your multifunction machine, you can create high
quality colour and black-and-white copies on various
paper types and formats. You can either copy automati-
cally—in other words, using the factory settings—or
you can use custom settings.
²
Use the image and text enhancement function
Crystal Image to create quality copies in col-
our or black-and-white. At the start of the copy process,
press the Crystal Image button to activate Crystal
Image (see chapter Crystal Image).
Making Copies with
the Factory Settings
1
Lay the document onto the flatbed scanner with
the written side facing down (see chapter Installa-
tion / Loading Documents).
Press one of the two K buttons (copy in colour or
2
black-and-white) twice. The copy is created.
²
If the machine is in energy saving mode you
have to press the button three times.
Making Copies with
Custom Settings
1
Lay the document onto the flatbed scanner with
the written side facing down (see chapter Installa-
tion / Loading Documents).
Press one of the two K buttons (copy in colour
2
or black-and-white) once. You have the following
options available:
Use the number keypad (or use /) to enter the
3
desired number of copies (1 to 99) and con-
firm with OK.
4
You have a higher resolution available to you for
copying than you have for fax transmissions. Select
the desired resolution with /:
20
DRAFT—For documents without drawings or details.
This is the fastest setting for copying. However, the
printing quality may appear worse. Confirm with OK.
NORMAL—For documents with small print or draw-
ings. This setting is the best option for most copying
needs. Confirm with OK.
QUALITY—For the highest resolution. The copy proc-
ess is slower than with the other two settings. This set-
ting produces the highest printing quality for image
files or photos. Confirm with OK.
²
For the special requirements of printing high
quality photos, we recommend using photo
paper (see chapter Installation / Loading Printing
Media / Loading Photo Paper) combined with photo
cartridges (see section Troubleshooting / Inserting
Photo Cartridges).
Under Scan SIZE use / to select the for-
5
mat of the loaded document and confirm with-
OK.
Under PapER SIZE use / to select the format
6
of the desired printing medium and confirm with
OK.
7
If the scan and paper formats are the same (see
steps 5 and 6), you can copy a document scaled
to as small as 25 % of the original size or magni-
fied as large as 400 %. The proportions of the origi-
nal are retained. Enter the desired value using the
number keypad (or with /) and confirm with
OK.
²
Align the document with the rear left corner
of the scanner glass.
If you would like to copy a detail (such as a graph-
ic) of your document, position the document such
that the corner of the detail is up against the origin.
Using the zoom function, you can separate the de-
sired area from rest of the document.
For a colour copy: Use / to set the saturation
8
COPIES 1
(colour density). The saturation is measured in
relation to the contrast: - diminishes the colours
(down to the grey range), + intensifies the colours.
Confirm with OK.
10×15 cm
10×15 cm
ZOOM 250%
4. Copier
Advertisement
Table of Contents
