Table of Contents
Advertisement
²
With menu function 83 you can check the
firmware version directly on the machine.
Press MENU/OK and 83. Enter the following
code using the number pad: 704100.
The display shows the current firmware version.
3
Download the firmware file from our homepage
and save it on your PC.
Æ
The firmware update deletes all tel-
ephone book entries as well as saved
fax, and SMS messages. Archive the tel-
ephone book with Companion – Address Book
or copy the entries to the Windows address book.
Print the saved messages before performing the
firmware update to prevent loss of data.
4
In the MFUpdateDevice window under Firmware
file to load select the saved firmware file. Then
click on Start upload to transfer the current
firmware file to the multifunction machine.
Æ
Check whether the message Bootloader
Writing appears on the display because
your machine should be in bootloader mode for
the update process.
Never disconnect the USB connection during
the update process!
Wait until the firmware update is completed
before performing more operations on your
multifunction machine.
5
During the first firmware update, windows appear
on the screen which must be handled differently
depending on the operating system:
Windows 2000 (SP 3): Select No, not this
time and click on Next. Follow the further in-
structions to complete the firmware update.
Windows XP (SP 2): Select No, not this
time and click on Next. Follow the further in-
structions to complete the firmware update.
58
3. Using Companion Suite IH
Advertisement
Table of Contents
