Table of Contents
Advertisement
Printing Image Files
²
Use the photo and text enhancement func-
tion Crystal Image to create quality printouts
in colour or black-and-white. At the start of the
printing process, press the Crystal Image but-
ton to activate Crystal Image (see chapter Crys-
tal Image).
In the photo menu, use / to select PRINT PIC-
1
TURES and confirm with OK. Use / to select
from the following options:
ALL—Press OK to print all detected photos.
RANGE—Press OK. Individually set the series of pho-
tos for the printout: Use the number keypad to enter
the number for the first photo and confirm with OK.
Then enter the number of the last photo of your print-
out. Confirm with OK.
SELECTed—Use / to select one or more photos for
printing. Add additional photos with OK. If you would
like to delete a photo, load it with / and press OK
again; the photo is removed from the selection. End the
selection process with K or Y.
²
If you are not certain which number corre-
sponds to which photo, first create an index
printout (see Index Printout).
Use the number keypad (or /) to enter the de-
2
sired number of copies (1 to 99) and confirm
with OK.
Use / to select the desired paper format and con-
3
firm with OK.
Use / to select whether you want to use normal
4
or coated paper, photo paper or a transparency.
Confirm with OK. (or with K or the Y but-
ton)
5
For Colour printout with Crystal Image: If you
want Crystal Image to implement the red eye re-
duction, use / to select reduction and con-
firm with OK.
²
Red eye reduction is a complex process and
can take some time. Confirm the query only
when needed.
6
Your multifunction machine starts the printing
with the user-defined settings.
²
Return to the last menu entry with C. You
may terminate the print job with X. The
page is ejected.
5. Photo Printer
No. of copies 1
10×15 borderl.
PHoto
Transferring a Scan to
PictBridge-
Directly Printing Files
Your multifunction machine meets the PictBridge stand-
ard. With PictBridge, the digital camera directly access
the photo printer. If you have connected a PictBridge
compatible digital camera to the multifunction ma-
chine, the message PICT BRIDGE appears on the dis-
play. The PictBridge function displays the print settings
supported by the multifunction machine (resolution,
paper format and type, file format, Crystal Image im-
age enhancement, etc.) on the display of your digital
camera.
Perform all the required steps on the digital camera.
Start the PictBridge printout directly from your digital
camera.
²
Connect the power supply of the digital cam-
era during the direct printing or make certain
that the battery is fully charged to prevent loss
of data.
Do not disconnect the USB connection until the
multifunction machine has completed all print
orders (see chapter Safety Instructions / Pho-
to Memory Media).
Slideshow
With this function, all photos detected on the storage
medium are shown on the colour display for five sec-
onds each.
Activate the function by using / in the photo menu
to select slideshow and confirm with OK. The
slideshow is started. After all the photos have been dis-
played, the machine returns to the photo menu.
²
Return to the last menu entry with C; return
to the starting mode with X.
Æ
It is only possible to display an image file if the
storage medium provides the required EXIF
information.
a Memory Card
With this function, you can scan a document with the
flatbed scanner and transfer the scan to the inserted
memory card.
²
Use the image and text enhancement function
Crystal Image to create a quality scan of the doc-
ument (in colour or black-and-white). Press the Crys-
tal Image button to activate Crystal Image (for more
detailed information, see chapter Crystal Image).
25
Advertisement
Table of Contents
