Canadian & Us Safety Installation Instructions; For Equipment With Internal Power Supplies; For Equipment With External Power Supplies - Nortel FastRad Installation Manual

Canadian & US Safety Installation Instructions
Please Read Carefully
WARNING: To avoid electrical shock hazard to personnel or equipment damage observe the
following precautions when installing telephone equipment:
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet loca-
tions.
3. Never touch uninsulated telephone wires or terminals unless the telephone line has been discon-
nected at the network interface.
4. Use caution when installing or modifying telephone lines.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature accom-
panying the product.
This symbol (if applicable) on the product is used to identify the following important information:

For equipment with internal power supplies:

• Mains nominal AC voltage 110-120 V~ ; 50/60 Hz
• Mains nominal AC voltage 220-240 V~ ; 50/60 Hz

For equipment with external power supplies:

• Must be powered from a CSA certified and UL listed or CSA-NRTL/C certified Class 2 power source
equipped with an appropriate mating connector. Please refer to installation instructions for details.
For current ratings, refer to product specific documentation and product labels.
FastRAD Regulations
i