Figure 2 Installing A T7316 Telephone (North America) - Nortel Business Communications Manager 2.5 Programming Manual

3
Connect the handset cord to the jack labelled with the telephone icon and route the cord as
shown.
4
If you are using a headset, route the cord along the channel in the base and connect the cord to
the telephone jack that is labelled with the headset icon.
5
Route the line cord through the support and connect the cord to the telephone jack that is
labelled with the jack icon.
6 Attach the support using either pair of slots; to raise the back of the telephone to its highest
position, use these slots.
7
When the above work is complete, plug the line cord back into its wall socket.
Figure 2 shows the T7316 installation procedure. See
America)" on page 21.

Figure 2 Installing a T7316 telephone (North America)

Figure 3 shows the T7316 and stand wall mounting procedure. See
with a stand on the wall" on page
"Installing a T7316 telephone (North
22.
Chapter 1 Introduction
"Mounting a T7316 telephone
Telephone Features Programming Guide
21