Defining A Local Directory Of Endpoints - RADVision Scopia XT Deployment Manual

Defining a Local Directory of Endpoints

About this task
The local directory is a local database containing names and IP addresses of endpoints on the Scopia
XT Desktop Server deployment. Typically, a local directory of endpoints is maintained in deployments
which do not include Scopia Management.
This list of endpoints is displayed when users select Moderate > Invite in their virtual room window in
Scopia XT Desktop Client.
Procedure
1. Access the Scopia XT Desktop Server Administration web interface.
2. Select Directory and Authentication icon in the sidebar.
3. Select the Directory tab.
4. To add a new endpoint to your local directory:
5. To edit properties for an endpoint:
6. To delete an endpoint from the database:
Deployment Guide for Scopia XT Desktop Server for IP Office
Version 8.2.1
Figure 18: Local database of endpoints
a. Select Add.
b. Enter the endpoint name and IP address.
c. Select OK.
a. Select the Edit icon next to the endpoint whose properties you want to edit.
b. In the Edit Entry window, edit properties as needed.
c. Select OK.
a. Select the check boxes for the endpoints you want to delete.
Configuring Your Deployment | 27