Installing The Slim Optical Drive Blank - Dell PowerEdge R630 Owner's Manual

Steps
1. Locate the touch point for the slim optical drive blank lock inside the system.
2. Press the lock and pull the slim optical drive blank out of the chassis.
Figure 43. Removing the slim optical drive blank
1. slim optical drive blank
Related Links
Safety instructions
Before working inside your system

Installing the slim optical drive blank

Installing the slim optical drive blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety instructions listed in the Safety instructions section.
Steps
1. Align the slim optical drive blank with the slim optical drive bay.
2. Slide the optical drive blank into the optical drive bay until the lock clicks into place.
Next steps
Follow the procedure listed in the After working inside your system section.
2. optical drive blank lock
109