Usata Ssd Indicator Codes - Dell PowerEdge R630 Owner's Manual

uSATA SSD indicator codes

Figure 9. uSATA SSD indicators
1. uSATA SSD activity indicator
3. uSATA SSD
NOTE: If the SSD is in the Advanced Host Controller Interface (AHCI) mode, the status indicator (on
the right side) does not function and remains off.
Table 9. Drive status indicator codes
Drive-status indicator pattern
Flashes green twice per second
Off
Flashes green, amber, and turns off
Flashes amber four times per second
Steady green
Flashes green for three seconds, amber for
three seconds, and turns off after six seconds
26
2. uSATA SSD status indicator
Condition
Identifying drive or preparing for removal.
Drive ready for insertion or removal.
NOTE: The drive status indicator remains off until
all hard drives are initialized after the system is
turned on. Drives are not ready for insertion or
removal during this time.
Predicted drive failure
Drive failed
Drive online
Rebuild aborted