Diagnostic Indicators - Dell PowerEdge R630 Owner's Manual

Item Indicator, Button, or
Connector
11 PSU1
12 PSU2
Related Links
Expansion card installation guidelines

Diagnostic indicators

The diagnostic indicators on the system front panel display system status during system startup.
NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.
NOTE: The diagnostic indicators are present only on the 10 hard drive and the 24 hard drive
systems.
NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it into
a working power source and press the power button.
Table 7. Diagnostic indicators
Icon Description
Health
indicator
Icon Description
or
•
•
•
•
•
•
•
Condition
The indicator turns solid
blue if the system is in good
health.
The indicator flashes amber:
• When the system is
turned on.
• When the system is in
standby.
• If any error condition
exists. For example, a
failed fan, PSU, or a hard
drive.
Four 10 Gbps
Two 495 W, 750 W, or 1100 W AC power supply
units (PSUs)
Or
Two 1100 W DC PSUs
Or
Two 750 W mixed mode PSUs
Two 495 W, 750 W, or 1100 W AC PSUs
Or
Two 1100 W DC PSUs
Or
Two 750 W mixed mode PSUs
Corrective action
None required.
Check the System Event Log or system
messages for the specific issue. For more
information about error messages, see the
Dell Event and Error Messages Reference
Guide at Dell.com/openmanagemanuals >
OpenManage software.
The POST process is interrupted without
any video output due to invalid memory
configurations. See the Getting help
section.
23