Installing The Slim Optical Drive Blank; Cooling Fans - Dell PowerEdge R630 Owner's Manual

Figure 28. Removing and installing the slim optical drive blank
1. slim optical drive blank

Installing the slim optical drive blank

Prerequisites
Ensure that you read the
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Align the slim optical drive blank with the slim optical drive bay.
2. Slide the optical drive blank into the optical drive bay until the lock clicks into place.
Next steps
Follow the procedure listed in

Cooling fans

Your system supports hot-swappable cooling fans.
NOTE: In the event of a problem with a particular fan, the fan number is referenced by the system
management software, allowing you to easily identify and replace the proper fan by noting the fan
numbers on the cooling-fan assembly.
76
Safety instructions.
After working inside your
2. optical drive blank lock
system.