Removing A 1.8-Inch Hard Drive From A Hard Drive Carrier - Dell PowerEdge R630 Owner's Manual

Figure 38. Installing a hot swappable hard drive into a hot swappable hard drive carrier
1. screw (4)
3. hard drive carrier

Removing a 1.8-inch hard drive from a hard drive carrier

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Remove the hard drive carrier from the system.
Steps
1. Turn the hard drive carrier.
2. Pull the rails of the hard drive carrier and lift the hard drive out of the hard drive carrier.
Figure 39. Removing a 1.8-inch hard drive into a hard drive carrier
1. hard drive carrier
Related Links
Safety instructions
2. hard drive
2. hard drive
105