Installing The Vga Module - Dell PowerEdge R630 Owner's Manual

Figure 95. Removing the VGA Module
1. screw
3. VGA module
Related Links
Safety instructions
Before working inside your system
Removing the control panel–10 hard drive and 24 hard drive system
Removing the control panel–eight hard drive system

Installing the VGA module

Safety instructions
Installing the VGA module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This procedure applies only to the eight hard drive system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Philips #2 screwdriver ready.
172
2. VGA module cable
4. control panel