Inside The System - Dell PowerEdge R630 Owner's Manual

Figure 21. Installing the system cover
1. latch release lock
3. system cover
Next steps
1. If removed, install the bezel.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Related Links
Safety instructions
Installing the optional front bezel
Removing the system cover

Inside the system

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: Components that are hot swappable are marked orange and touch points on the
components are marked blue.
2. latch
83