Dell PowerEdge R630 Owner's Manual page 24

Icon Description
Hard drive
indicator
Electrical
indicator
Temperature
indicator
Memory
indicator
PCIe indicator The indicator flashes amber
Related Links
Getting help
Expansion card installation guidelines
24
Condition
The indicator flashes amber
if there is a hard drive error.
The indicator flashes amber
if the system experiences an
electrical error (for example,
voltage out of range, or a
failed power supply unit
(PSU) or voltage regulator).
The indicator flashes amber
if the system experiences a
thermal error (for example,
the ambient temperature is
out of range or fan failure).
The indicator flashes amber
if a memory error occurs.
if a PCIe card experiences
an error.
Corrective action
Check the System Event Log to determine
the hard drive that has an error. Run the
appropriate Online Diagnostics test. Restart
the system and run embedded diagnostics
(ePSA). If the hard drives are configured in a
RAID array, restart the system and enter the
host adapter configuration utility program.
Check the System Event Log or system
messages for the specific issue. If it is due
to a problem with the PSU, check the LED
on the PSU. Reseat the PSU. If the problem
persists, see the Getting help section.
Ensure that none of the following
conditions exist:
• A cooling fan has been removed or has
failed.
• System cover, cooling shroud, EMI filler
panel, memory module blank, or back
filler bracket is removed.
• Ambient temperature is too high.
• External airflow is obstructed.
See the Getting help section.
Check the system event log or system
messages for the location of the failed
memory. Reseat the memory module. If
the problem persists, see the Getting help
section.
Restart the system. Update any required
drivers for the PCIe card. Reinstall the card.
If the problem persists, see the Getting help
section.
NOTE: For more information on
supported PCIe cards, see the
Expansion card installation guidelines
section.