Hard Drive Indicator Codes - Dell PowerEdge R630 Owner's Manual

Hard drive indicator codes

Figure 8. Hard drive indicators
1. hard drive activity indicator
3. hard drive
NOTE: If the hard drive is in the Advanced Host Controller Interface (AHCI) mode, the status
indicator (on the right side) does not function and remains off.
Table 8. Hard drive indicator codes
Drive-status indicator pattern (RAID only)
Flashes green twice per second
Off
Flashes green, amber, and turns off
Flashes amber four times per second
Flashes green slowly
Steady green
Flashes green for three seconds, amber for
three seconds, and turns off after six seconds
2. hard drive status indicator
Condition
Identifying drive or preparing for removal.
Drive ready for insertion or removal.
NOTE: The drive status indicator remains off until
all hard drives are initialized after the system is
turned on. Drives are not ready for insertion or
removal during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild stopped
25