Dell PowerEdge R630 Owner's Manual page 113

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the USB port or USB key on the system board.
To locate the USB port, see the System board jumpers and connectors section.
2. If installed, remove the USB key from the USB port.
Figure 47. Removing the internal USB key
1. USB memory key
3. Insert the replacement USB key into the USB port.
Figure 48. Installing the internal USB key
1. USB memory key
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. While booting, press F2 to enter System Setup and verify that the system detects the USB key.
Related Links
Safety instructions
System board jumpers and connectors
Before working inside your system
After working inside your system
System Setup
2. USB port
2. USB port
113