Table of Contents
Advertisement
Figure 33. Removing the optical drive or tape drive blank
Next steps
1
Install the drive blank, an optical drive, or a tape drive.
2
If applicable, replace the front bezel.
Related link
Installing a drive blank
Installing the optical drive cage or tape drive
Removing the front bezel
Installing the front bezel
Installing the optical or tape drive blank
Prerequisites
1
Follow the safety guidelines listed in
2
If applicable, remove the front bezel.
Steps
1
Align the guide on the drive blank with the slot on drive bay.
2
Slide the drive into the slot until the latch snaps into place.
Safety
instructions.
Installation and Service Manual
Installing and removing system components
81
Advertisement
Table of Contents
