Dell PowerEdge R630 Owner's Manual page 51

System Profile Settings
Miscellaneous Settings
iDRAC Settings utility
Device Settings
System Security
Viewing System BIOS
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related Links
System BIOS
System BIOS Settings details
System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
Option Description
System Specifies information about the system such as the system model name, BIOS
Information version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor Settings Specifies information and options related to the processor such as speed and
cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify
UEFI and BIOS boot settings.
Network Settings Specifies options to change the network settings.
Integrated Specifies options to manage integrated device controllers and ports and specify
Devices related features and options.
Serial Specifies options to manage the serial ports and specify related features and
Communication options.
System Profile Specifies options to change the processor power management settings, memory
Settings frequency, and so on.
System Security Specifies options to configure the system security settings, such as system
password, setup password, Trusted Platform Module (TPM) security. It also
manages the power and NMI buttons on the system.
Miscellaneous Specifies options to change the system date, time, and so on.
Settings
51