HP 12500 Configuration Manual page 62

Task
Display the source IPv4
address or interface
configured for the device
to use for outgoing Telnet
packets when serving as a
Telnet client.
Release a user interface.
Lock the current user
interface.
Send messages to user
interfaces.
Command
display telnet client
free user-interface { num1 | { aux |
console | vty } num2 }
lock
send { all | num1 | { aux | console |
vty } num2 }
54
Remarks
N/A
Multiple users can log in to the device to
simultaneously configure the device.
When necessary, you can execute this
command to release some connections.
You cannot use this command to release
the connection you are using.
By default, the system does not lock any
user interface.
N/A