Displaying The Current Working Directory; Changing The Current Working Directory; Creating A Directory; Removing A Directory - HP 12500 Configuration Manual

Displaying the current working directory

Perform this task in user view.
Task
Display the current working directory.

Changing the current working directory

Perform this task in user view.
Task
Change the current working directory.

Creating a directory

Perform this task in user view.
Task
Create a directory.

Removing a directory

To remove a directory, you must delete all files and subdirectories in this directory. To delete a file, use the
delete command. To delete a subdirectory, use the rmdir command.
Removing a directory permanently deletes all its files in the recycle bin, if any.
Perform this task in user view.
Task
Remove a directory.

Managing storage media

To reinstall a storage medium that was removed while you or someone else was accessing a folder or file
on the storage medium, you must release or have the user release the resource by changing the current
directory or closing the file, or by unmounting the partition holding the folder or file.
Only administrators who have the right to manage MDCs can manage the storage media.
Before you repair or format a USB disk, make sure the disk is not write protected.
Command
pwd
Command
cd { directory | .. | / }
Command
mkdir directory
Command
rmdir directory
83