HP 12500 Configuration Manual page 176

server IP address, and a DNS server IP address. For more information, see
"Automatic-configuration parameter acquisition
After getting automatic configuration parameters, the device tries to download a configuration file
3.
from a TFTP server. For more information, see
If the device gets a configuration file, it deletes its temporary settings to restore the factory defaults
4.
and then executes the configuration file. Otherwise, the device deletes its temporary settings,
select another qualified interface, and repeats Step 2 to Step 4.
IMPORTANT:
• To ensure quick and successful automatic configuration of a device, connect only the interface used for
automatic configuration to the network.
The configuration file is deleted after being executed. After the device completes the automatic
•
configuration process, save the configuration by using the save command. Otherwise, the device has to
perform automatic configuration again after reboot. For more information about the save command,
Fundamentals Command Reference
see
Figure 49 shows the automatic configuration workflow.
process."
"Configuration file acquisition
.
168
process."