Configuring Common Console/Aux User Interface Settings - HP 12500 Configuration Manual

Step
2. Enter
user interface view.
3. Enable
authentication.
To use scheme authentication, you must also configure login authentication methods in ISP domain view.
For more information, see Security Configuration Guide.
The next time you attempt to log in through the console or AUX port, you must provide the configured
login username and password, as shown in
Figure 17 Scheme authentication interface for console login
Figure 18 Scheme authentication interface for AUX login

Configuring common console/AUX user interface settings

Some common settings configured for a console or AUX user interface take effect immediately and can
interrupt the current session. To avoid repeated re-logins, use a login method different from console/AUX
login to log in to the device before you change console/AUX user interface settings.
Command
console/AUX
user-interface { aux | console }
first-number [ last-number ]
scheme
authentication-mode scheme
Remarks
N/A
By default, the authentication mode is none
for the console user interface and
password for the AUX user interface.
Figure 17 and Figure 18.
45