Task
View and manage the output from a
display command effectively.
For example:
# Save the running configuration to a separate file named test.txt, with each line numbered.
<Sysname> display current-configuration | by-linenum > test.txt
# Append lines including "snmp" in the running configuration to the file test.txt.
<Sysname> display current-configuration | include snmp >> test.txt
Saving the running configuration
To make your configuration survive a reboot, save the running configuration to a configuration file by
using the save command in any view. This command saves all commands that have been successfully
executed except for the one-time commands. Typical one-time commands include the display commands
used for displaying information and the reset commands used for clearing information.
For more information about the save command, see Fundamentals Command Reference.
Command
display command [ | [ by-linenum ] { begin | exclude | include }
regular-expression ] [ > filename | >> filename ]
14