Ftp Server Configuration Example In Irf Mode - HP 12500 Configuration Manual

User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
# Use the ASCII mode to download the configuration file startup.cfg from the device to the PC for
backup.
ftp> ascii
200 TYPE is ASCII
ftp> get startup.cfg back-startup.cfg
# Use the binary mode to upload the file temp.bin from the PC to the Flash root directory of the
active MPU.
ftp> binary
200 Type is Image (Binary)
ftp> put temp.bin
# Exit FTP.
ftp> bye

FTP server configuration example in IRF mode

Network requirements
An IRF fabric that comprises two member devices acts as the FTP server. The slot numbers of the active
and standby MPUs on the master and subordinate members are 0 and 1.
Create a local user account with username abc and password 123456 on the FTP server. Use the user
account to log in to the FTP server from the FTP client, upload the file temp.bin from the FTP client to the
FTP server, and download the configuration file config.cfg from the FTP server to the FTP client for backup.
Figure 31 Network diagram
Configuration procedure
Configure IP addresses as shown in
1.
each other. (Details not shown.)
Configure the FTP server:
2.
# Examine the storage space on the member devices. If the free space is insufficient, use the
delete/unreserved file-url command to delete unused files. (Details not shown.)
# Create a local user account abc, set the password to 123456, the user role to network-admin,
the working directory to the Flash root directory of the IRF fabric's active MPU, and the service type
to FTP.
Figure 31, and make sure the IRF fabric and the PC can reach
67