HP 12500 Configuration Manual page 71

Figure 28 Network diagram
Configuration procedure
# Enable the Telnet server.
<Device> system-view
[Device] telnet server enable
# Enable command accounting for user interface Console 0.
[Device] user-interface console 0
[Device-ui-console0] command accounting
[Device-ui-console0] quit
# Enable command accounting for user interfaces VTY 0 through VTY 15.
[Device] user-interface vty 0 15
[Device-ui-vty0-15] command accounting
[Device-ui-vty0-15] quit
# Configure an HWTACACS scheme that uses the HWTACACS server at 192.168.2.20:49 for
accounting, uses the shared key expert, and removes domain names from usernames sent to the
HWTACACS server. (In this example the HWTACACS server provides accounting services at port 49.)
[Device] hwtacacs scheme tac
[Device-hwtacacs-tac] primary accounting 192.168.2.20 49
[Device-hwtacacs-tac] key accounting expert
[Device-hwtacacs-tac] user-name-format without-domain
[Device-hwtacacs-tac] quit
# Configure the command accounting method for the system-predefined domain system to use the
HWTACACS scheme.
[Device] domain system
[Device-isp-system] accounting command hwtacacs-scheme tac
[Device-isp-system] quit
63