Specifying A Disk Space Percentage For An Mdc; Specifying A Memory Space Percentage For An Mdc - HP 12500 Configuration Manual

Specifying a disk space percentage for an MDC

By default, MDCs on a device share and compete for the disk space of the device's storage media, such
as the Flash and CF cards. If an MDC occupies too much disk space, the other MDCs might not be able
to save information such as configuration files and system logs. To avoid this problem, specify a disk
space percentage for each MDC.
Before you specify a disk space percentage for an MDC, use the display mdc resource command to view
the amount of disk space the MDC is using. The amount of disk space indicated by the percentage must
be greater than that the MDC is using. Otherwise, the MDC cannot apply for more disk space and no
more folders or files can be created or saved for the MDC.
If the device has more than one storage medium, the disk space percentage specified for an MDC takes
effect on all the media.
To specify a disk space percentage for an MDC:
Step
1. Enter system view.
2. Enter MDC view.
3. Specify a disk
space percentage
for the MDC.

Specifying a memory space percentage for an MDC

By default, MDCs on a device share and compete for the system memory space. If an MDC occupies too
much memory space, the other MDCs might not be able to operate normally. To avoid this problem,
specify a memory space percentage for each MDC.
Before you specify a memory space percentage for an MDC, use the display mdc resource command to
view how much memory space the MDC is using. Make sure the amount you assign to an MDC is
sufficient for the MDC to operate properly.
To specify a memory space percentage for an MDC:
Step
1. Enter system view.
2. Enter MDC view.
3. Specify a memory
space percentage
for the MDC.
Command
system-view
mdc mdc-name [ id mdc-id ]
•
In standalone mode:
limit-resource disk slot slot-number ratio
limit-ratio
•
In IRF mode:
limit-resource disk chassis chassis-number slot
slot-number ratio limit-ratio
Command
system-view
mdc mdc-name [ id mdc-id ]
•
In standalone mode:
limit-resource memory slot slot-number ratio
limit-ratio
•
In IRF mode:
limit-resource memory chassis chassis-number
slot slot-number ratio limit-ratio
202
Remarks
N/A
N/A
By default, all MDCs share
the disk space in the system,
and an MDC can use all
free disk space in the
system.
Remarks
N/A
N/A
By default, all MDCs share
the memory space in the
system, and an MDC can
use all free memory space
in the system.