Setting The Operation Mode For Files And Folders - HP 12500 Configuration Manual

Configuration procedure
Perform this task in user view.
Task
Partition a storage medium.

Setting the operation mode for files and folders

The device supports the following file and folder operation modes:
• alert—The system warns you about operations that may cause problems such as file corruption and
data loss. To avoid operation mistakes, use the alert mode.
quiet—The system does not prompt for confirmation.
•
To set the operation mode for files and folders:
Step
1. Enter system view.
2. Set the operation mode for
files and folders.
Command
fdisk medium-name
[ partition-number ]
Command
system-view
file prompt { alert | quiet }
86
Remarks
By default, only one partition cf0:/ is
available on a CF card and only one
partition usb0:/ is available on a USB
disk.
Remarks
N/A
The default mode is alert.