Filtering The Output From A Display Command - HP 12500 Configuration Manual

2: VLAN type: Static
3: Route interface: Configured
4: IP address: 10.1.1.125
5: Subnet mask: 255.255.255.0
6: Description: VLAN 0100
7: Name: VLAN 0100
8: Tagged ports:
9: Untagged ports:
10: GigabitEthernet7/0/1
11:

Filtering the output from a display command

You can use the | { begin | exclude | include } regular-expression option to filter the display command
output:
begin—Displays the first line matching the specified regular expression and all subsequent lines.
•
exclude—Displays all lines not matching the specified regular expression.
•
include—Displays all lines matching the specified regular expression.
•
regular-expression—A case-sensitive string of 1 to 256 characters, which can contain the special
•
characters described in
Table 5 Special characters supported in a regular expression
Characters
^
$
. (period)
*
+
|
( )
\N
None
Table 5.
Meaning
Matches the beginning of a line.
Matches the end of a line.
Matches any single character.
Matches the preceding character or
string zero, one, or multiple times.
Matches the preceding character or
string one or multiple times.
Matches the preceding or succeeding
string.
Matches the string in the parentheses,
usually used together with the plus sign
(+) or asterisk sigh (*).
Matches the preceding strings in
parentheses, with the Nth string
repeated once.
Examples
"^user" matches all lines beginning with "user". A
line beginning with "Auser" is not matched.
"user$" matches all lines ending with "user". A line
ending with "userA" is not matched.
".s" matches "as" and "bs".
"zo*" matches "z" and "zoo", and "(zo)*" matches
"zo" and "zozo".
"zo+" matches "zo" and "zoo", but not "z".
"def|int" matches a string containing "def" or "int".
"(123A)" matches "123A".
"408(12)+" matches "40812" and "408121212",
but not "408".
"(string)\1" matches a string containing
"stringstring".
"(string1)(string2)\2" matches a string containing
"string1string2string2".
"(string1)(string2)\1\2" matches a string
containing " string1string2string1string2".
10