Verifying The Configuration - HP 12500 Configuration Manual

Select Level 3 for the Max Privilege for any AAA Client option.
c.
Select the Use separate password option, and specify enabpass as the password.
d.
Figure 6 Configuring advanced TACACS+ settings

Verifying the configuration

Telnet to the switch, and enter the username test@bbb and password aabbcc to access the user
1.
interface. Verify that you have access to diagnostic commands.
<Switch> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.59 ...
******************************************************************************
* Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
login: test@bbb
Password:
32
*
*
*