Figure B-2. Starting The Ip Interface Test; Technician Interface - Nortel 114200-E Installation And Operating

Installing and Operating Passport ARN Routers
Name and save the configuration file.
7.
The script begins to test the configuration on the new IP interface
(Figure
Testing local IP interface
ping -IP 192.32.00.000 -r5
IP ping:
IP ping:
IP ping:
IP ping:
IP ping:
This test attempts to ping the Site Manager workstation.
NOTE: If routing has not yet converged, an attempt
Type q<return> to cancel this test.
Enter IP address of Site Manager workstation:
Figure B-2.
To continue the IP configuration test, enter the IP address for the Site
8.
Manager workstation.
To cancel the test, enter
Choose whether you want to configure another module/port.
9.
If you enter
prompt appears. If you enter
When the Technician Interface prompt reappears, enter
10.

Technician Interface.

When the router creates and tests the configuration, it starts using the
configuration information you entered. Refer to Configuring Passport Remote
Access to configure the router using Site Manager.
B-18
B-2).
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
to ping the Site Manager workstation may fail.
this happens, you may either enter a new IP address or
quit and wait a short period of time and try again from
the TI command line.
Starting the IP Interface Test
.
q
, (to stop configuring modules/ports), the Technician Interface
n
, you return to Step 6 of this procedure.
y
If
to exit the
logout
114200-E Rev 00