Table of Contents
Advertisement
Global Information Worksheet
Step
Requested Information
3
Enter IP address in dotted
decimal notation:
Enter IP subnetwork mask in
dotted decimal notation:
Is the router connected to
the same local area network
as the Site Manager
workstation?
(y/n) [n]:
Enter routing protocol
number [1]:
Enter wide area protocol
number [1]:
Do you wish to set
SNMP community
management?
(y/n) [n]:
4
Enter (TFTP) volume number
[1]:
5
Do you want to enable
FTP? (y/n) [n]:
Enter (FTP) volume number
[1]:
114200-E Rev 00
Using Local Boot (the Quick-Start Procedure)
(continued)
Options
Enter the IP address for the COM
interface.
Enter the subnetwork mask for
the COM interface IP address.
y(es)
n(o)
1. RIP
2. OSPF
3. Static Route to Site Manager
1. Nortel Networks
Point-to-Point Protocol
(Proprietary)
2. Frame Relay
3. Point-to-Point Protocol (PPP)
Standard
4. Switched Multimegabit Data
Service (SMDS)
y(es)
n(o)
Setting up SNMP community
management is optional.
The script automatically selects
"1" as the TFTP default volume.
y(es)
n(o)
Enabling FTP is optional.
The script automatically selects
"1" as the FTP default volume.
Your Response
Press the Return
key.
(Complete the
worksheet for the
protocol you
select.)
(Complete the
worksheet for the
protocol you
select.)
None
(continued)
B-7
Advertisement
Table of Contents
