Nortel 114200-E Installation And Operating page 50

Installing and Operating Passport ARN Routers
When you have the appropriate equipment, complete the following steps:
Turn on and configure the terminal, using the parameters in
1.
and the terminal user guide.
Table 1-3.
Parameter
Baud Rate
Data Bits
Stop Bits
Parity
Turn off the terminal.
2.
Insert the 9-pin receptacle end of the console cable into the ARN Console
3.
connector.
Attach the null modem crossover adapter to the 25-pin connector.
4.
Insert the screw on the cable connector into the receptacle on the adapter
connector and tighten the screw (refer to
Attach the 25-pin receptacle connector on the combined cable and
5.
adapter to the console host connector
100-240~
1.2A
50-60Hz
Figure 1-22.
1-26
Console Parameters
Value
9600
8
1
None
U L
Redundant Power
U L
Connecting a Terminal Console to an ARN
Figure 1-20
(Figure
COMM
Console Modem
Table 1-3
on page 1-24).
1-22).
20 mA PR KB
Console cable plus
null modem adapter
ARN0058A
114200-E Rev 00