Running The Quick-Start Script - Nortel 114200-E Installation And Operating

Installing and Operating Passport ARN Routers
SMDS Worksheet
Requested Information
Enter 10-digit individual address:
Enter 10-digit group address:
Enter 10-digit arp address:

Running the Quick-Start Script

The Quick-Start script is called inst_arn.bat and you run it as part of the Local
Boot process.
Note: Before you run the Quick-Start script, make sure you have the
completed worksheets with you.
Begin local boot as follows:
At the Technician Interface
1.
Enter
2.
file when booting.
For information about the
Command" on page A-7.
Reboot the router by entering
3.
The Technician Interface login prompt appears.
Log in to the Technician Interface.
4.
The Technician Interface mounts the local file system and displays a prompt
indicating the present working directory.
B-16
Options
Enter the individual address
assigned to you by your SMDS
service provider.
Enter the group address
assigned to you by your SMDS
service provider.
Enter the Address Resolution
Protocol (ARP) address
assigned to you by your SMDS
service provider.
bconfig config local
bconfig
prompt, enter
login:
to configure the router to use the local config
command, see "Using the bconfig
boot .
Your Response
Manager to log in.
114200-E Rev 00