Connecting To The 56/64K Dsu/Csu Interface; Connecting To The Ft1/T1 Dsu/Csu Interface - Nortel 114200-E Installation And Operating

Installing and Operating Passport ARN Routers

Connecting to the 56/64K DSU/CSU Interface

You connect 56/64K DSU/CSU service to the connector on an installed 56/64K
DSU/CSU adapter module.
To connect to the 56/64K DSU/CSU interface:
Insert the 56/64K DSU/CSU cable connector into the DSU/CSU interface
1.
labeled DDS
1
2
Figure 1-14.
Connect the other end of the cable to a digital line (for example, a digital
2.
line wall jack that connects to an office channel unit [OCU]).

Connecting to the FT1/T1 DSU/CSU Interface

You connect FT1/T1 DSU/CSU service to the connector on an installed FT1/T1
DSU/CSU adapter module.
To connect to the FT1/T1 DSU/CSU interface:
Insert the RJ-48C cable connector into the FT1/T1 DSU/CSU interface
1.
on the adapter module
1-18
(Figure 1-14).
S/T
ISDN BRI
DDS
TxD CD
56K/64K
RxD Test
DSU/CSU
To
digital line
wall jack
Connecting the 56/64K DSU/CSU Cable
(Figure
ARN0065A
1-15).
114200-E Rev 00