Ethernet 10/100Base-Tx Leds; 114200-E Rev 00; Ethernet 100Base-Fx Leds; Token Ring Leds - Nortel 114200-E Installation And Operating

Installing and Operating Passport ARN Routers

Ethernet 10/100BASE-Tx LEDs

Table 3-3
Table 3-3.
LED
TX (Transmit)
RX (Receive)
CL (Collision)
Link
100

Ethernet 100BASE-Fx LEDs

Table 3-4
Table 3-4.
LED
TX (Transmit)
RX (Receive)
Link
100

Token Ring LEDs

Table 3-5
Table 3-5.
LED
RCVR (Receiver)
NSRT (Insert)
WFLT (Wire Fault)
3-4
describes the base module Ethernet 10/100BASE-Tx LEDs.
Base Module Ethernet 10/100BASE-Tx LEDs
Meaning
Lights when the Ethernet interface transmits data.
Lights when the Ethernet interface receives data.
Lights when the Ethernet interface detects a collision.
Lights when the Ethernet interface has an established link.
Lights when the Ethernet interface is running at 100Mbps. If not
lit, the interface is running at 10Mbps.
describes the base module Ethernet 100Base-Fx LEDs.
Base Module Ethernet 100Base-Fx LEDs
Meaning
Lights when the Ethernet interface transmits data.
Lights when the Ethernet interface receives data.
Lights when the Ethernet interface has an established link.
Lights when the Ethernet interface is running at 100Mbps.
describes the base module token ring LEDs.
Base Module Token Ring LEDs
Meaning
Lights when the token ring interface is connected to the
network.
Lights when you insert the ARN into the token ring network.
Lights when the token ring hardware detects a wire fault
condition.

114200-E Rev 00